← All text tools

Bicycle gear inches calculator

Calculate gear inches, development and speed at a chosen cadence from chainring teeth, rear cog teeth and wheel size, with a cadence table.

  • Free
  • No sign-up
  • Works on any device

About Bicycle gear inches calculator

Gear inches is a way to compare bicycle gearing: the wheel diameter multiplied by chainring teeth and divided by rear cog teeth. A 50 tooth ring with a 15 tooth cog on a 27 inch wheel gives 90 gear inches. Multiply by pi to get the development, the distance rolled for one pedal turn, which here is 7.18 metres. Multiply that by cadence to get speed: 90 pedal turns per minute is 38.78 kilometres per hour. The page shows a table of speeds from 60 to 120 rpm, so you can see how a ratio fits your cadence.

How to use Bicycle gear inches calculator

  1. Type the number of teeth on your chainring and on the rear cog you want to check.
  2. Enter the wheel diameter in inches and the cadence you usually ride at.
  3. Read gear inches, development and speed, then compare the cadence table for the whole range.

Why use this tool?

Also known as

Frequently asked questions

Which wheel diameter should I enter?

The outside diameter of the inflated tyre in inches. A 700x25c road wheel is close to 27, a 26 inch mountain bike wheel about 26, and a 29er about 29. Roll-out measurements are more precise.

What gear inches are low or high?

Roughly 20 to 40 is a low climbing gear and around 100 or more is a fast road gear, but it depends on your strength and terrain. Compare your own gears with this number.

Does this work for hub gears?

Yes, if you enter the overall ratio as chainring teeth over a cog size that gives the same ratio. For example, a 1.5 to 1 internal gear with a 44 over 16 drive can be entered as 66 over 16.

Is Bicycle gear inches calculator free?

Yes. Bicycle gear inches calculator on Toolipedia is free to use, with no sign-up and no watermark.

Is it safe to use?

Yes. Everything is worked out in your browser, and nothing you enter is sent to our server.

Does it work on my phone?

Yes. It works in any modern browser on Android and iPhone, as well as on tablets and computers. There's nothing to install.

Do I need an account?

No. Just open the page and use the tool. There's no sign-up and no email needed.

Can I put Bicycle gear inches calculator on my own website?

Yes. Use the Embed on your site button under the tool to copy a short piece of code and paste it into your page. It is free, needs no account, and the tool keeps working inside your page.

Related tools