← All text tools

Crown molding miter and bevel calculator

Get the saw miter and bevel settings for cutting crown molding on inside and outside corners for any wall angle and spring angle, flat or nested.

  • Free
  • No sign-up
  • Works on any device

About Crown molding miter and bevel calculator

Crown molding leans out from the wall at its spring angle, so a square-looking cut on a 90 degree corner needs a compound angle. Laid flat on the saw, the miter angle is atan(sin(spring) over tan(wall angle over 2)) and the bevel angle is asin(cos(spring) times cos(wall angle over 2)). For a square corner that gives 31.62 and 33.86 degrees with 38 degree molding, and 35.26 and 30 degrees with 45 degree molding. Cut nested against the fence, you set only a miter of 90 minus half the wall angle. A table lists common wall angles.

How to use Crown molding miter and bevel calculator

  1. Measure the angle between the two walls with an angle finder; a square corner is 90 degrees.
  2. Pick the spring angle of your molding: 38 or 45 degrees for most crown, or enter your own.
  3. Set the saw to the flat miter and bevel shown, or to the nested miter, and test on a scrap piece first.

Why use this tool?

Also known as

Frequently asked questions

How do I find my crown molding's spring angle?

It is the angle between the back of the molding and the wall when installed. Hold a framing square against the two back edges that touch the wall and ceiling; most crown is 38 or 45 degrees.

Do inside and outside corners use different numbers?

The angles are the same size, but the left and right pieces swap, and the direction of the miter and bevel changes. Mark your pieces and test on scrap.

When should I cut nested instead of flat?

Cutting nested keeps the molding in the position it will have on the wall, so only a miter is needed. It is quick for square corners but needs the molding held at the correct spring angle against the fence.

Is Crown molding miter and bevel calculator free?

Yes. Crown molding miter and bevel calculator on Toolipedia is free to use, with no sign-up and no watermark.

Is it safe to use?

Yes. Everything is worked out in your browser, and nothing you enter is sent to our server.

Does it work on my phone?

Yes. It works in any modern browser on Android and iPhone, as well as on tablets and computers. There's nothing to install.

Do I need an account?

No. Just open the page and use the tool. There's no sign-up and no email needed.

Can I put Crown molding miter and bevel calculator on my own website?

Yes. Use the Embed on your site button under the tool to copy a short piece of code and paste it into your page. It is free, needs no account, and the tool keeps working inside your page.

Related tools