← All text tools

Torque calculator

Calculate torque from force, lever arm length and angle, read it in N·m, lb-ft and kgf-m, and find the force a target torque needs.

  • Free
  • No sign-up
  • Works on any device

About Torque calculator

Torque is the turning effect of a force, τ = r · F · sin θ, where r is the distance from the pivot and θ the angle between the force and the lever arm. A push at 90 degrees gives the full torque, and one at 30 degrees gives half. Enter force and arm in the units you have and read newton-metres, pound-feet, pound-inches and kilogram-force metres together. Add a target torque to find the force you need. The table works through a wheel-nut wrench.

How to use Torque calculator

  1. Enter the force and choose newtons, pounds-force or kilograms-force.
  2. Enter the lever arm length and its unit, and the angle between the force and the arm.
  3. Read the torque in several units and optionally type a target torque to find the force required.

Why use this tool?

Also known as

Frequently asked questions

How do I convert N·m to lb-ft?

Multiply by 0.737562. For instance, 50 N·m is about 36.88 lb-ft, and 1 lb-ft is 1.35582 N·m.

Why does the angle matter?

Only the part of the force at right angles to the lever arm turns the bolt. Pulling at 30 degrees to the handle gives just half the torque of a 90 degree pull.

How much force do I need on a longer wrench?

Force = torque ÷ arm length. A 110 N·m torque takes 244 N on a 0.45 m wrench, and a longer bar needs proportionally less.

Is Torque calculator free?

Yes. Torque calculator on Toolipedia is free to use, with no sign-up and no watermark.

Is it safe to use?

Yes. Everything is worked out in your browser, and nothing you enter is sent to our server.

Does it work on my phone?

Yes. It works in any modern browser on Android and iPhone, as well as on tablets and computers. There's nothing to install.

Do I need an account?

No. Just open the page and use the tool. There's no sign-up and no email needed.

Can I put Torque calculator on my own website?

Yes. Use the Embed on your site button under the tool to copy a short piece of code and paste it into your page. It is free, needs no account, and the tool keeps working inside your page.

Related tools