← All text tools

Capacitor code decoder

Decode capacitor markings such as 104 or 4R7 into picofarads, nanofarads and microfarads, and read the tolerance letter and voltage code printed on the part.

  • Free
  • No sign-up
  • Works on any device

About Capacitor code decoder

Small ceramic and film capacitors are printed with a short code instead of a value. Three digits work like resistor colours: the first two are the value in picofarads and the third is the number of zeros, so 104 is 10 followed by four zeros, 100,000 pF, 100 nF or 0.1 µF. A third digit of 8 or 9 means multiply by 0.01 or 0.1, and an R marks a decimal point, as in 4R7. A letter after the digits gives the tolerance and a code such as 1H gives the voltage. The tool decodes all of these at once.

How to use Capacitor code decoder

  1. Type the digits printed on the part, with or without a trailing tolerance letter.
  2. Add the tolerance letter or the voltage code if they are printed separately.
  3. Read the value in picofarads, nanofarads and microfarads, with the tolerance and voltage.

Why use this tool?

Also known as

Frequently asked questions

What does 104 mean on a capacitor?

It means 10 followed by 4 zeros in picofarads: 100,000 pF, which is 100 nF or 0.1 µF. It is one of the most common decoupling capacitors.

How do I read a code with a letter at the end?

The letter is the tolerance: J is plus or minus 5 percent, K is 10 percent and M is 20 percent. Letters B, C and D are fixed picofarads for very small capacitors.

Is the voltage code the same on every brand?

The two-character scheme such as 1H for 50 volts is common on ceramic parts, but makers differ. Confirm with the datasheet before using the part near its limit.

Is Capacitor code decoder free?

Yes. Capacitor code decoder on Toolipedia is free to use, with no sign-up and no watermark.

Is it safe to use?

Yes. Everything is worked out in your browser, and nothing you enter is sent to our server.

Does it work on my phone?

Yes. It works in any modern browser on Android and iPhone, as well as on tablets and computers. There's nothing to install.

Do I need an account?

No. Just open the page and use the tool. There's no sign-up and no email needed.

Can I put Capacitor code decoder on my own website?

Yes. Use the Embed on your site button under the tool to copy a short piece of code and paste it into your page. It is free, needs no account, and the tool keeps working inside your page.

Related tools